Blog Article

Mall Christmas Decorations: Inside Our MGM Cotai Build

How Elite Fixtures built the Christmas decorations at MGM Cotai, Macau: a castle tree, Santa house and giant bells, and how to plan one for your mall.

Castle Christmas tree with backlit stained-glass panels and a second tree on an arched base under the glass dome at MGM Cotai

Christmas installation at MGM Cotai, Macau, built and installed by Elite Fixtures.

mall christmas decorationscommercial christmas decorcustom christmas display fabricationgiant christmas tree for mallholiday display installation

Every November, a mall atrium has a few weeks to become the place people travel to photograph. This season, Elite Fixtures built and installed the Christmas decorations in the Spectacle atrium at MGM Cotai in Macau: a castle-topped Christmas tree, a second tree on a stained-glass base, a snow-roofed Santa house, a light-up mailbox, an igloo, a golden teepee and giant suspended bells. Mall Christmas decorations are large, custom-built holiday installations (trees, houses, figures and suspended features) designed to draw shoppers into a common area, and to be installed, maintained and removed around a mall that never closes. This article walks through what we built, how we built and tested it at our factory, and what it takes to do the same for your mall.

See the full MGM Cotai Christmas display

The brief was one connected Christmas village, not a single tree. Each piece had to stand up to the atrium's architecture: a triangular glass lattice dome, wall-sized LED screens and planted green walls.

We answered with a set of pieces that share one visual language of deep green, polished gold, red poinsettia and warm backlit glass:

  • The castle tree: the centrepiece, a tree crowned with turrets and lanterns, sitting on a round green-and-gold base with an arched stained-glass window
  • The stained-glass tree: a second tree on an octagonal base of backlit arched panels, ringed with marquee bulbs
  • The Santa house: a red cottage with a snow roof, lit windows and Santa climbing a ladder to the chimney
  • The mailbox: a snow-capped red post box with a stream of glowing envelopes, and Santa reading his letter on a bench
  • The igloo and the teepee: two walk-up photo spots, each with a lit tree and a teddy bear in a red cape
  • The bells and stars: oversized rainbow bells and star lanterns suspended from the dome

The dome, LED screens, green walls, giraffe topiaries and gold sculptures are part of the venue. Everything else on the floor and hanging below the dome was part of the Christmas package.

The MGM Cotai Christmas display, from fabrication to the finished atrium, by Elite Fixtures.
Castle Christmas tree and stained-glass tree seen from the upper level, with the mailbox display behind
The two trees from the upper level, with the mailbox display at the back.
Overview of the Christmas display from above, with a lit tree, golden teepee and teddy bear in front of a jewelry store
Each display sits on its own planted island, so shoppers can walk between them.

Build the centrepiece as architecture, not decoration

A centrepiece tree in an atrium this size has to read from three floors up and from two metres away. That is why Elite Fixtures treated the castle tree as a building first and a tree second.

The base is a round drum of green panels with gold capitals, vertical LED lines and a balustrade. One side holds a full-height arched window with a red poinsettia pattern, lit from behind. Above it, the tree rises in tiers, carrying more than a dozen turrets and lanterns with faceted red and green roofs, small gabled windows and a gold lion at the front. At the top, a tower lantern sits under a white star.

The detail at eye level is what makes a tree feel premium. From the floor, visitors see the gold trim, the pattern in the glass and the finish on the base, not the tree's silhouette. We gave the base the same attention we give a luxury showcase.

Castle Christmas tree with a full-height backlit poinsettia window in its base, during installation
The arched poinsettia window in the base of the castle tree.
Side of the castle tree with turret lanterns, gold balustrade and green base with LED lines
Turret lanterns and the green-and-gold base, with the final dressing still going on.

The second tree repeats the language at a smaller scale: an octagonal base of arched stained-glass panels, gold columns and a ring of marquee bulbs, with the tree above dressed in red baubles and lit star medallions.

Christmas tree on an octagonal base of backlit stained-glass panels, viewed from the upper level
The octagonal base, shown from above with the marquee bulb ring.

Design photo spots that work for every visitor

A mall Christmas display earns its budget when visitors stop, photograph it and share it. Every piece outside the two trees was designed as a photo spot with a clear front, a clear subject and its own light.

  • The Santa house works from every side. Front-on, it is a lit cottage. From the side, Santa climbs a gold ladder to the roof. From above, the snow roof and marquee lights frame the whole scene.
  • The mailbox turns a story into a photo: envelopes outlined in light tumble out of the slot, and Santa sits on a bench with a letter of his own.
  • The igloo and the teepee give visitors a doorway to stand in, so a family photo has a natural frame.
Red Santa house with a snow roof and Santa on a ladder, on a poinsettia island under suspended bells
The Santa house, with suspended bells above.
Side view of the Santa house with Santa on a ladder and a red LED wall behind
Santa climbing to the chimney.
Santa house with marquee lights along the roof, in front of a gold sculpture
Marquee bulbs along the roof edge of the Santa house.
Top view of the Santa house on its curved poinsettia island with mirror spheres and gift boxes
From the upper level, the curved island and gold edge frame the scene.
Red Christmas mailbox with light-outlined envelopes and a Santa figure holding a letter on a bench
The mailbox, with envelopes outlined in light.
White geodesic igloo with a teddy bear, snowman and lit Christmas tree with window lights
The igloo photo spot.
Golden teepee with a marquee-lit red arch, a teddy bear by a campfire and a lit Christmas tree
The golden teepee, with its marquee-lit doorway.
Christmas tree with lit window ornaments and a golden teepee in front of a green wall with giraffe topiary
The teepee island next to the venue's giraffe topiary.
Teddy bear in a red cape beside a lit campfire and a Christmas tree with window lights
The teddy bear and campfire in front of the tree.

Use the ceiling, not just the floor

In a tall atrium, floor displays alone leave the upper floors looking empty. Suspended pieces connect the levels, so a shopper on the third floor still sees Christmas at eye level.

We hung oversized bells with striped red, green and yellow panels, a gold rim and a lit ring at the base, along with faceted star lanterns. Their colours echo the stained-glass panels on the trees, so the floor and the ceiling read as one scheme.

Giant rainbow Christmas bell with a lit gold ring, in front of an LED wall and a green wall
A suspended bell up close.
Suspended Christmas bells and star lanterns under the glass lattice dome, with the LED walls behind
Bells and stars spread across the dome.
Pair of rainbow Christmas bells and a gold star hanging below the triangular lattice ceiling
Two bells and a star lantern under the lattice ceiling.

Every island also sits on a custom curved platform with a gold edge band and an LED wash at floor level, planted with live poinsettias. The platforms define the walkways, keep visitors a safe distance from the pieces and give every display a finished edge on a marble floor.

Build and test-assemble everything in the factory

Nothing in this display was built for the first time in the mall. Every piece was fabricated, wired and fully set up at our factory before it was packed, so problems were found on a factory floor, not in a live atrium.

  • The bells start as steel. Each bell is built on a mirror-polished stainless steel frame: a domed cap, a central post with a hanging point and curved ribs that give the bell its shape. The coloured panels and the lit ring fit onto this frame.
  • The house goes up in full. The Santa house was assembled on its own gold-edged platform with the tree arches, garland, marquee bulbs, Santa, ladder and gift boxes in place, so every light could be tested and every joint checked.
  • The tree and platform are set up as one. The window-light tree stood on its stepped gold platform with the mirror spheres laid out, to confirm the curves, levels and lighting before it all came apart for shipping.

A full test assembly costs time at the factory and saves far more on site. Crews arrive with pieces they have already put together once, numbered and packed in assembly order.

Mirror-polished stainless steel bell frame with a domed cap and curved ribs during fabrication
A suspended bell's stainless steel frame during fabrication.
Santa house fully assembled on its gold platform in the factory, with gift boxes in front
The Santa house set up and lit in the factory, with finished gift boxes in front.
Christmas tree with window lights on a stepped gold platform with mirror spheres, set up in the factory
The tree and its gold platform during test assembly, before packing.

Install in a mall that stays open

Holiday installation is the part most buyers underestimate. The mall keeps trading, the date cannot move, and the pieces are large. At MGM Cotai, the Elite Fixtures crew worked in zones behind stanchion barriers while the rest of the atrium stayed open to visitors.

Three things kept the install safe and on time:

  • Floor protection first. Tarps and boards went down before any lift or crate came onto the marble.
  • The right access equipment. Scissor lifts handled the tree base and lower tiers, and a tracked boom lift placed the turrets and the star at the top.
  • Pieces designed for assembly. Turrets, lanterns and panels arrived as finished, pre-tested modules, so on-site work was assembly, connection and dressing, not fabrication.
Castle Christmas tree during installation, with scissor lifts and a red tracked boom lift behind barriers
Scissor lifts and a boom lift working inside a fenced zone.
Installer in a boom-lift basket placing the star on top of the castle Christmas tree
Final dressing around the castle tree, with poinsettias still in their boxes.

Plan your mall's Christmas display

The same approach works for a mall in Toronto or anywhere else in North America. Our view is simple: commission one centrepiece built to last several seasons, and refresh the smaller pieces around it. A well-built tree base, house or set of suspended features can be stored and reinstalled, while the dressing and colours change year to year.

Elite Fixtures brings the trades a centrepiece needs under one roof: custom millwork for the bases and houses, metal fabrication for frames, trim and hanging points, and LED and backlit panels wired at our factory before shipping. If you want a sculpture rather than a seasonal display, see our guide to mirror stainless steel sculpture.

FAQ

How far ahead should a mall order custom Christmas decorations?

Start about four months before the install date. Our minimum for custom production is 75 days, and that is counted after design approval. For a mid-November install, that means sending the brief by July. Rush production from about 50 days is sometimes possible at a higher cost. See our lead time page for how the schedule works.

Can mall Christmas decorations be reused next year?

Yes, if they are designed for it. Bases, houses, suspended pieces and platforms can be built as modules that are taken apart, crated and stored. The tree dressing, colours and smaller figures can then change each season while the main structure stays. Tell us at the start if you want to reuse the pieces, because it affects how they are built.

Does Elite Fixtures install holiday displays in Toronto malls?

Yes. We design and manufacture the pieces, ship them, and install them. On-site work in Ontario is carried out with $2,000,000 commercial general liability insurance and WSIB coverage. For malls outside the GTA, we can ship finished modules with assembly drawings or send a supervisor to the install.

Bring your holiday centrepiece to life

A mall Christmas display works when the centrepiece is built like architecture, every piece is a photo spot, everything is test-assembled before it ships, and the install is planned around a mall that stays open. The MGM Cotai project shows all three at full scale. If you are planning next season's display, or a permanent feature for your atrium, send us your floor area, ceiling height and install date and we will tell you what fits the schedule.

Related Posts

Continue reading

Getting Brand Colors Right in Fixture Manufacturing: Lessons from a Dopamine-Color Kiosk article cover image from Elite Fixtures

August 27, 2026

Getting Brand Colors Right in Fixture Manufacturing: Lessons from a Dopamine-Color Kiosk

Why brand colors go wrong between design files and finished fixtures — and how color-driven brands can control paint, laminate, and acrylic matching, based on the Chako Lab kiosk build.

Read article
Titanium Retail Fixtures: Storefront and Display Uses article cover image from Elite Fixtures

June 17, 2026

Titanium Retail Fixtures: Storefront and Display Uses

Titanium retail fixtures can make sense for premium storefronts, outdoor displays, facade details, and luxury retail accents where durability and appearance both matter.

Read article
Recent Retail Fixture Project Video Update from Elite Fixtures article cover image from Elite Fixtures

April 20, 2026

Recent Retail Fixture Project Video Update from Elite Fixtures

A short project reel highlighting the kind of custom retail fixture direction, detailing, and presentation quality Elite Fixtures is sharing through recent social updates.

Read article

Need a Quote?

Share your store concept, category, and timeline

Reach our Toronto office for project coordination and use the factory-backed production workflow for custom fixtures, display systems, millwork, and rollout-ready fit-out support.