[email protected]
Elite Fixtures Custom Retail Fixtures · LED Display Cabinets

Commercial Renovation · Greater Toronto Area

Commercial renovation and store fit-out for our fixture clients in the GTA

When a custom fixture project needs more than fixtures, our Toronto team can carry the renovation and fit-out work around it: demolition, electrical and plumbing coordination, carpentry, painting, flooring, and signage. One team, one schedule, and on-site work covered by commercial liability insurance and WSIB.

Request a Fit-Out Quote All Services
Home / Services / Commercial Renovation

Who this service is for

This is not a standalone general contracting service. It is offered to the commercial clients we build fixtures for, so the fixtures and the space around them are planned, quoted, and finished by the same team.

  • Retail stores planning new display cabinets, wall systems, or a full refresh
  • Restaurants, cafes, and bubble tea shops that need counters, seating, and finishes
  • Offices and showrooms that want reception desks, feature walls, and storage built in
  • Clinics, pharmacies, and optical stores that need counters, cabinetry, and compliant finishes

Insured and WSIB-covered

Insurance

$2,000,000 commercial general liability insurance

WSIB

WSIB coverage in good standing

Service area

Toronto, Markham, Scarborough, Mississauga, Vaughan, Richmond Hill

Canada office

9390 Woodbine Ave, Markham, ON L6C 0M5

Insurance and WSIB documentation can be provided to landlords and property managers before work starts.

Scope of Work

What a commercial fit-out can include

Each item is quoted separately, so you can see what the fixtures cost and what the site work costs before deciding how much to hand to us.

Demolition and site preparation

Removal of old fixtures, counters, partitions, and ceiling elements, with debris cleared and the space prepared for new work.

Electrical coordination

Licensed electricians check existing circuits, voltage, and load before new lighting, display cabinets, or equipment are connected, and certify the completed work.

Plumbing coordination

Sink, service counter, and back-of-house plumbing routed and connected by licensed trades where the layout calls for it.

Carpentry and millwork

Partitions, bulkheads, feature walls, built-in cabinetry, and fixture blocking prepared to match the fixture drawings.

Painting and ceilings

Patching, levelling, and repainting after light removal or layout changes, including ceiling repairs and repositioned fixtures.

Flooring and finishing

Floor repair or replacement, baseboards, trims, and clean junctions where new fixtures meet existing surfaces.

Signage and lighting

Storefront signs, illuminated logos, LED strips, and display lighting coordinated with the electrical scope.

Fixture installation

Our own display cabinets, counters, racks, and wall systems placed, levelled, fixed, and connected as the last step before handover.

Business Types

Retail, restaurant, office, and clinic spaces

Retail stores

Display cabinets, wall systems, checkout counters, and lighting refreshed as one coordinated fit-out, from jewelry and optical to beauty and apparel.

Restaurants and cafes

Service counters, bubble tea and coffee bars, seating, menu boards, and the plumbing and electrical work behind them.

Offices and showrooms

Reception desks, meeting rooms, feature walls, product displays, and storage built into a working office or brand showroom.

Clinics and pharmacies

Reception and dispensing counters, cabinetry, and durable, easy-to-clean finishes for medical, dental, and pharmacy spaces.

Full scope: fixtures plus fit-out

We carry the fixtures and the site work as one project, with one schedule and one point of responsibility. This suits full refreshes and new openings where the owner wants a single team accountable for the result.

Fixtures only: you manage the trades

We design, produce, ship, and install the fixtures. You engage your own electrician, painter, and other trades for the site work. This keeps the budget lower and the responsibilities clearly separated.

From a Toronto project

Custom LED Display Cabinets for a Toronto Store: What Really Drives the Fit-Out Cost

On a recent Toronto retail store project, the custom LED display cabinets were only one line in the budget. The larger costs came from on-site trades. Here is what those trades actually do, and a practical way to split the scope when the total quote feels high.

Read why site work often costs more than the cabinets

Process

From site visit to handover

01

Site visit and scope

We walk the space, review the existing conditions, and agree what stays, what goes, and what the fixtures need from the site.

02

Drawings and quote

Layout, fixture drawings, and a scope-by-scope quote so you can see the fixture cost and the site-work cost separately.

03

Permits and approvals

Where wall changes, structural work, or electrical changes need permits or landlord approval, that time is built into the schedule before work starts.

04

Production and site works

Fixtures are produced in our factory while demolition, trades, painting, and flooring progress on site.

05

Installation and handover

Fixtures are installed, lighting is connected and tested, finishes are touched up, and the space is handed over ready to open.

Service area

Our Toronto team works from the Markham office and focuses on Toronto, Markham, Scarborough, Mississauga, Vaughan, and Richmond Hill. Plazas, malls, street-front stores, and office units across these cities are all within normal reach for site visits, deliveries, and installation crews. Nearby areas in the Greater Toronto Area can be quoted on request.

  • Commercial renovation and store fit-out in Toronto
  • Commercial renovation and store fit-out in Markham
  • Commercial renovation and store fit-out in Scarborough
  • Commercial renovation and store fit-out in Mississauga
  • Commercial renovation and store fit-out in Vaughan
  • Commercial renovation and store fit-out in Richmond Hill
LED display cabinet production in the Elite Fixtures factory before installation in a Toronto store

Fixtures are produced in our own factory while site works progress, so installation happens once the space is ready.

FAQ

Common questions about commercial renovation with Elite Fixtures

Is your on-site renovation work insured?

Yes. On-site work by Elite Fixtures in Ontario is carried out with $2,000,000 commercial general liability insurance and WSIB coverage in good standing. We can provide documentation to landlords and property managers on request.

Do you take on renovation projects without fixtures?

Our renovation and fit-out service is offered to commercial clients as part of a fixture project. If your project is renovation only, tell us the scope through the contact page and we will let you know honestly whether it is a good fit.

Which areas do you cover?

We focus on Toronto, Markham, Scarborough, Mississauga, Vaughan, and Richmond Hill. Nearby areas in the Greater Toronto Area can be quoted on request.

Do I need a permit for my store renovation?

Freestanding fixtures usually do not need a permit. Removing or building walls, structural changes, and electrical or plumbing changes often do, and most commercial leases also require landlord approval. We identify this during the site visit so the approval time is planned in.

Can we reduce the quote by handling some trades ourselves?

Yes. Many clients keep the fixtures with us and engage their own electrician, painter, or flooring contractor. We provide the fixture drawings and site requirements those trades need, and we agree in writing where each scope starts and ends.

Who handles the electrical connection for LED display cabinets?

The cabinets arrive with internal wiring and a connection point. A licensed electrician checks the circuit and load and completes the connection to store power, either as part of our scope or yours.

Start with a site visit or a floor plan

Send the store address, a floor plan or rough dimensions, a few site photos, and the fixture categories you have in mind. We will quote the fixtures and the site work separately.

Request a Fit-Out Quote

Need a Quote?

Share your store concept, category, and timeline

Reach our Toronto office for project coordination and use the factory-backed production workflow for custom fixtures, display systems, and rollout-ready shopfitting support.

Request a Project Quote Email Directly
Get a Quote